Sony HVR-A1N - Manual (Page 60)

60
HVR-A1U/A1N 2-639-667-11(1)
• If either the CH1 or CH2 setting is changed to
[AUTO] or [MANUAL], the other setting is
automatically changed to the same setting.
LCD/VF SET
The recorded picture will not be affected
by this operation.
 LCD BRIGHT
You can adjust the brightness of the LCD
screen.
 Adjust the brightness with / .
 Touch .
• You can also turn off the LCD backlight (p.14).
 LCD BL LEVEL
You can adjust the brightness of the LCD
screen’s backlight.
 NORMAL
Standard brightness.
BRIGHT
Brightens the LCD screen.
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], battery life is
slightly reduced during recording.
 LCD COLOR
You can adjust the color on the LCD screen
with
/ .
Low intensity High intensity
 VF B.LIGHT
You can adjust the brightness of the
viewfinder.
 NORMAL
Standard brightness.
BRIGHT
Brightens the viewfinder screen.
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [ON], the battery life is
slightly reduced during recording.

VF POWER
 AUTO
The picture is not displayed in viewfinder
when the LCD panel is open.
ON
The picture is displayed in viewfinder
when the LCD panel is open.
• When you select [ON], the battery life is
slightly reduced during recording.

VF COLOR
 ON
Display pictures in the viewfinder in color.
OFF
Display pictures in the viewfinder in black
and white.

ALLSCAN MODE
When you set [ALLSCAN MODE] to
[ON], you can check the area surrounding
the picture frame. During the simple all
scan display, a black frame appears around
the screen. Set to [OFF] to return to the
previous screen.
• When this function is activated, pictures are
output in the interlace letter box except for the
HDV signals from the COMPONENT OUT and
HDV/DV Interface (i.LINK) jacks.
• The default setting is [OFF].
COMPONENT
Select the input signal when connecting
your camcorder to a TV with the
component input jack.
480i
Select when connecting your camcorder to
a TV compatible with 480i.
480p/480i
Select when connecting your camcorder to
a TV compatible with 480p/480i.
STANDARD SET menu (Continued)