Sony Ericsson Dialog 4223 - Manual (Page 40)

Call Metering
BusinessPhone – Dialog 4223 Professional / Dialog 3213 40
ì
In case of a typing error, press the Volume Down key to delete
the latest entered digit.
activate Press to confirm the Password (see display).
Select the type of meter you want to read out.
caller Press to read out an extension counter (see display).
If the system is included in a network, you will be able to read out
the cost of the tie lines in this menu.
Or:
trunk Press to read out a trunk line counter (see display).
z
Enter the directory number of the desired extension or trunk
line.
(If you do not enter a directory number the accumulated cost of the
entire system will be shown.)
return Press to return to previous menu (see display).
reset Press to reset counter (see display).
Note: The
reset
function in this menu is only applicable
when a printer is connected to the system. To initiate a reset
procedure you require a special authority level (please ask
your system administrator if this feature is available on your
phone). To avoid different countervalues for total extensions
and total trunk lines in the system, we recommend to reset
all the extensions and trunk line counters at the same time.
print Press to initiate a printout on the printer (see display).
This function is applicable when a printer is connected to the
system.
You also require a special authority level to initiate a printout. For a
detailed description of the printout, see section “ Printout ” on
page 42.
12 May 10:35 +15°
SELECT TYPE OF METER
caller trunk return
12 May 10:35 +15°
ENTER DIRECTORY NUMBER:
display print reset return