Sony Ericsson Dialog 4223 - Manual (Page 101)

101 BusinessPhone – Dialog 4223 Professional / Dialog 3213
Settings
Ringing signal
By programming, you can adjust ringing type (2 types), ringing
volume (10 steps) and ringing character (10 characters).
prog Press (see display).
ringing Press (see display).
You can now select ringing type, volume or character.
Ringing type
Select type 1 if you want to set the ringing volume at a constant
level, select type 2 if you want gradually increasing volume when
the phone rings.
type Press (see display).
You will hear the selected type.
next Press to change (see display).
í
Press to finish the procedure.
Note: When type 2 is selected, the programming of the
ringing volume is not applicable.
Ringing volume
volume Press (see display).
You will hear the selected volume (0...lowest volume, 9...highest).
lower Press lower or higher to change the level (see display).
í
Press to finish the procedure.
Note: This programming is not applicable when you have
selected ringing type 2.
12 May 10:35 +15°
PHONE PROGRAMMING
key short-no. diversion ringing