Specialized SpeedZone Sport Bicycle - Manual (Page 5)

and kilometers by pressing the "MODE"
button. When the correct choice is
flashing, select it by pressing the
"FUNCTION" button. You will now
enter the "Programmable Odometer"
mode. If the odometer setting is correct
push the "FUNCTION" button 4 times
to exit to odometer mode. (Otherwise,
see "Setting the programmable odome-
ter" below)
2. Setting the Programmable
Odometer
To access the programmable odometer
mode, first advance the "MODE" but-
ton until (OD) appears on the bottom
of the screen. Then hold down the
"FUNCTION" button and ‘tap’ the
"MODE" button once. (See figure 4)
The Km/h indicator will flash. If the
Km/h setting is correct press the
"FUNCTION" button once and a four-
digit number will appear. You are now
in the programmable odometer mode.
This mode is useful if you have
replaced the battery and would like to
retain the mileage you have already
ridden. To enter a mileage into the
odometer, press the "MODE" button
until the flashing digit is correct. (Note:
The "MODE" button may be held to
5
FIGURE 4: PROGRAMMABLE
ODOMETER SCREEN