Operating positions, Working with kneading hooks, beaters and whisks – Silvercrest SKM 550 A1 User Manual

Page 6

Advertising
background image

- 4 -

Operating positions

Important: Only operate the appliance when
accessories are attached and in the operating
positions shown in this table. NEVER operate the
appliance without ingredients.

Working with kneading hooks,

beaters and whisks

Note: The appliance may only be used when
the drive openings not being utilised are
covered with drive protection lids.

Position

Accessories

1

2

3

4

Positioning of the mixing bowl
Utilisation of kneading hooks,
beaters and whisks

5

Insertion of large amounts to
be processed

To prepare the appliance for work with kneading
hooks

q

, beaters

w

and whisk

e

, proceed as

follows:
• Press the unlocking button

f

and bring the swivel

arm

h

into operating position 4 (see chapter

„Operating positions“) (Fig.

Ạ).

• Insert the mixing bowl

y

. The base of the mixing

bowl

y

must engage in the recesses

k

on the

appliance.

• Press the unlocking button

f

and bring the swivel

arm

h

into operating position 1 (see chapter

„Operating positions“) (Fig.

Ạ).

• Place and hold turn-switch

g

in position P, until

the drive motor

j

remains stationary in the park

position (Fig.

ạ). Should the drive motor not

move it is already at the park position.

• Press the unlocking button

f

and bring the swivel

arm

h

into operating position 4 (see chapter

„Operating positions“) (Fig.

Ạ).

• Depending on the task to be performed, insert

the kneading hooks

q

, beaters

w

or whisks

e

so that they firmly engage in the drive

j

motor.

Note: The kneading hooks

q

are fitted with a

pastry deflector. Turn the pastry deflector until the
kneading hooks

q

can engage (Fig.

Ả).

• Place the ingredients to be processed into the

mixing bowl

y

.

Note: Pay heed that during the kneading
and/or mixing process the pastry in the mixing
bowl increases in volume, or is pressed upwards
through the rotary movement. Take note of the
table in the chapter „Recommended filling
quantities“.

• Press the unlocking button

f

down and bring the

swivel arm

h

to just before operating position 1

(see chapter "Operating positions") (Fig.

Ạ),

but do not allow it to engage.

• Slide the lid onto the mixing bowl

y

.

Advertising
This manual is related to the following products: