Select “ok,” and press enter, If the timer settings overlap, Press system menu – Sony RDR-GX700 User Manual
Page 45: Select “timer list,” and press enter, See page 43, See page 44, The system menu appears, Green): indicates the setting can be recorded, The sub-menu appears
45
Rec
o
rd
in
g
3
Press the number buttons to enter the
PlusCode number, and press SET.
• If you make a mistake, press CLEAR and re-
enter the correct number.
4
Select “OK,” and press ENTER.
The date, start and stop times, programme
position, recording mode, and PDC/VPS
setting (page 43) appear.
If you want to change the setting, press
</
, to select the item and press M/m to change
the setting.
To re-enter the PlusCode number, select
“Change.”
5
Select “OK,” and press ENTER.
The TIMER REC indicator lights up on the
front panel, and the recorder is ready to start
recording.
To stop recording during timer recording
Open the remote’s cover and press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
If the timer settings overlap
To extend the recording duration time while
recording
To confirm, change, or cancel timer recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” (page 45).
z
Hint
The Rec Mode Adjust function also works with this timer
method (page 43).
Checking/Changing/
Cancelling Timer Settings
(Timer List)
You can check, change, or cancel timer settings
using the Timer List menu.
1
Press SYSTEM MENU.
The System Menu appears.
2
Select “TIMER LIST,” and press ENTER.
Timer information displays the recording
date, time, recording mode, etc.
: Indicates that the setting is overlapped by
another setting.
a
(green): Indicates the setting can be
recorded
z
(red): Indicates the setting currently being
recorded.
z
(grey): Indicates that the setting cannot be
recorded in the selected recording mode.
3
Select the timer setting you want to check/
change/cancel, and press ENTER.
The sub-menu appears.
Timer - VIDEO Plus+
Is the following timer setting correct? To modify,
adjust each item or re-enter the timer code.
Date
Mon 28.6 10
Start
Prog.
Mode
OK
00
:
11
Stop
30
:
HQ
Off
AAB
Cancel
Change
VPS
PDC
-RW
VR
-RW
Video
+
RW
-
R
+
R
1
2
3
4
5
6
7
8
9
0
SYSTEM
MENU
<
/
M
/
m
/
,
,
ENTER
O
RETURN
10:30
TIMER LIST
Mon-Sat
22:00-22:15
Fri 29.10 20:30-21:30
Fri 29.10 21:00-22:00
Sat 30.10 16:00-17:00
PDC
VPS
PDC
VPS
AAB
DEF
GHI
DEF
SP
SP
SLP
SLP
,
continued