Sony SNC-xx User Manual
Page 15
1
3
1
2
Setting the IP Address
of the Camera
9-a
“DHCP Enabled No” is displayed
When using Windows XP
When “Manually Configured” is displayed
in the “Address Type” box
Set the IP address.
Select [Use the following IP address], and type the IP address, Subnet Mask, and Default Gateway,
referring to the values used in items
to entered in the appropriate boxes in step
7-a
of
Confirming the Settings of the Computer
1
Click this radio button.
Type the values previously written in
.
Enter numbers which are different from the
values previously written in
, and are not
used in the same network.
1)
Type the numbers previously written in
.
Type the numbers previously written in
.
(When the “Default Gateway” address is
not displayed in
7-a
in step
7
of
Confirming the settings of the computer
1
, leave
this box blank.)
1)
“Numbers which are different from those in
, and not used in the same network” means:
For example, if
is 10, enter numbers other than 10 that are not used in the same network (for
example 100). You cannot use 0 and 255, because they have already been reserved in the network.
Also, avoid using numbers 250 through 255, which are frequently used in other networks.
When there is a network administrator, ask for and obtain an IP address from the network
administrator. If not, you can obtain an un-used IP address.
To obtain an un-used IP address, see “Confirming an IP address that is not currently used in
the network” (page 10).
Go to step
10
.