Sima Products USB-101 - Manual (Page 22)

USB-101 User manual Specifications
Page 22
Optional Features
Run User Program
Run User Program will run user applications compiled
specifically for the Hitch
TM . One major use of this
feature is to execute the application necessary to update
the firmware on your Hitch
TM unit. After installing the
user program according to instructions on page 28, you
must run the program and reboot to re-configure your
Hitch
TM unit
1. Go to the Settings menu and press the SELECT
button to advance to the Main menu.
2. Turn the scroll wheel clockwise to select Run User
Program.
3. Press the SELECT button. The files loaded during
the Install User File step will be displayed.
4. Highlight the file you want to run and press the
SELECT button to begin the file transfer.
5. The application selected will begin to execute.
6. In the case of a firmware update, the AC power jack
MUST be connected in order for the update
application to proceed. DO NOT disconnect the USB
drive or the AC power during the update process.
The screen will display a Copy files progress bar
followed by a Checking files screen and an Updating
files screen.