Woodstock D4041 - Manual

COPYRIGHT © JULY, 2010 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China #13127TR
TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY WHEN USING THIS ITEM:
1. MITER SAW SAFETY. Follow all safety instruc-
tions in the miter saw manual.
2. MITER SAW WORK STAND SET UP. Make sure
the leg locking pins are fully snapped into
place before mounting the miter saw.
3. MITER SAW WORK STAND PLACEMENT. Only
operate the miter saw work stand on a hard,
flat, and level surface. DO NOT set up the
miter saw work stand on a soft surface, such
as sand or mud.
4. MITER SAW WORK STAND USAGE. Only use
the miter saw work stand to support a miter
saw. This stand is NOT intended for use as a
ladder or scaffolding.
5. WORKPIECE BALANCE. Use extra support
tables, or get assistance, when working with
large workpieces to prevent the stand from
tipping over.
6. ATTACH MITER SAW SECURELY. DO NOT
operate the miter saw unless it is securely
attached to the miter saw work stand.
7. LOCK WORK SUPPORTS. Tighten lock knobs
to secure the work supports before using the
miter saw work stand.
8. EXPERIENCING DIFFICULTIES. If at any time
you are experiencing difficulties performing
the intended operation, stop using this stand!
Contact Tech Support at (360) 734-3482 for
help.
Model D4041
Miter Saw Stand
Instruction Sheet
Phone #: (360) 734-3482 • Online Tech Support: [email protected] • Web: www.shopfox.biz
Introduction
The Model D4041 Miter Saw Work Stand ( Figure 1)
features a universal, adjustable T-track mounting system
for securing miter saws without modification. Laterally
and vertically adjustable ball bearing rollers on each
end of the stand support long workpieces. Roller mounts
rotate incrementally for fine height adjustment. Folding
legs and rubber wheels make this work stand portable.
Unpacking
This item was carefully packaged for safe transportation.
If you notice that it was damaged during shipping, please
contact your Shop Fox dealer immediately.
Figure 1. Model D4041.