Sony D-FJ737 - Manual (Page 26)

26
Troubleshooting
Symptom
“Hold” appears in the
display when you press a
button, and the CD does not
play.
You cannot operate the CD
player using the tuner-remote
control.
During recording with optical
digital connection, the track
number cannot be recorded
correctly.
The CD player does not start
charging.
Playback starts from the
point you stopped. (resume
function)
Radio
Symptom
Cannot operate the radio.
Inserted a new battery into
the tuner-remote control but
cannot operate your CD
player.
When using the tuner-remote
control separately, you
cannot adjust the volume
with the VOL control.
When listening to the radio,
noise is heard.
CD sound and radio sound
are heard at the same time.
Cause and/or corrective actions
c The buttons are locked. Slide the HOLD switch back. (page 16)
c The buttons are locked. Slide the HOLD switch back on the tuner-
remote control. (page 16)
c The CD/RADIO selector on the tuner-remote control is set to
“RADIO.” Set it to “CD.” (page 13)
c Check that the remote control cord is connected to the CD player
and the tuner-remote control securely.
c Record the track number again using the MiniDisc recorder, DAT
recorder, etc. (page 18)
c See the instruction manual that comes with the recording device.
(page 18)
c During stop, press x/CHG. (page 20)
c The resume function is working. To start playing from the first
track, press u until the play of the first track starts, or open the lid
of the CD player. Or remove all power sources, then insert the
batteries or connect the AC power adaptor again. (pages 6, 20 - 23)
Cause and/or corrective actions
c The CD/RADIO selector on the tuner-remote control is set to
“CD.” Set it to “RADIO.” (page 13)
c The tuner-remote control is connected to your CD player and weak
batteries are in the battery compartment of the CD player.
When you want to use the tuner-remote control separately,
disconnect it from the CD player.
When you want to use the tuner-remote control connected to the
CD player, replace the batteries in the CD player with new LR6
(size AA) alkaline batteries. (page 22)
c The plug of the headphones/earphones is connected to the
REMOTE jack of the tuner-remote control.
Connect it to the i (headphones) jack. (page 6)
c Disconnect the AC power adaptor or the car battery cord from the
CD player.
c Use the tuner-remote control away from the CD player.
c Reorient the tuner-remote control.
c Do not use the radio in the buildings or the area where the noise is
often heard.
c Set the CD/RADIO selector on the tuner-remote control to “CD.”
Reset it to “RADIO” or “CD.”