Sanyo VPC-HD1010GX - Manual (Page 96)

77
English
SHOOTING SINGLE SHOTS
Using the flash
The flash is not only used for photographing under dark conditions, but is also
convenient for example when the subject is in shadow or lit from behind. Your
camera is equipped with four flash modes: red-eye reduction, auto flash,
forced flash, and no flash. Select the flash mode that is suitable for the
shooting conditions. The flash is available only when shooting single-shot still
images.
1
Press the m button to open the
flash unit.
h The flash unit opens.
2
Display the SIMPLE Mode Shooting Menu (page 49), select the flash
setting, and press the SET button.
h The screen to select the flash operation appears.
9: The camera detects the subject brightness and uses the flash only
when necessary.
:: The flash operates with every image captured regardless of the
conditions.
;: The flash does not operate even in dark situations.
<: The camera detects the subject brightness and uses the flash only
when required. At this time the flash operates in a manner that
reduces the red reflection (“red-eye”) in the subject’s eyes.
OK EXIT
Auto
Flash automatically