Samsung 2Z47 - Manual (Page 2)

English - 2
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ Caution: One pole switch is totally not off(one line still live)
if power cord is not unplugged.
Viewing the Menus
 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: “Input”, “Picture”, “Sound”, “Channel”,
and “Setup”.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon’s sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected items.
Press the MENU button to return to the previous menu.
5 Press the EXIT button to exit from the menu.
Remote Control
(depending on the model)
➢ Operation of remote control may be affected by bright
artificial light near to the TV.
1 POWER
Turns the TV on and off.
2 MENU
Displays the main
on-screen menu.
3 ▲/▼/◄/►
Controls the cursor in
the menu.
VOL +, VOL -
Press to increase or
decrease the volume.
CH , CH
Press to change
channels.
4 MUTE
Press to temporarily cut
off the sound.
5 Number buttons
Press to select channels
directly on the TV.
6 INFO
Press to display
information on the TV
screen.
7 SOURCE
Press to display all
of the available video
sources.
8 TOOLS (depending on
the model)
You can check the
following selection by
pressing TOOLS button.
. Sleep Timer
Press to select a
preset time interval
for automatic shut off.
2. Picture Mode
Used to select the
picture effect.
3. Sound Mode
Used to select sound
effect.
4. MTS(Multi-channel
Television Sound)
Press to choose
"Stereo" or "Mono".
5. Turbo Sound
Used to select the
turbo sound option.
6. R. SURF
Press to automatically
return to a preferred
channel after a user
preset time delay.
7. Sound Adjust
Used to display the
sound adjust menu.
9 ENTER
While using the
on-screen menus, press
ENTER to activate
(or change) a particular
item.
0 EXIT
Press to exit the menu.
! PRE-CH
Tunes to the previous
channel.
Installing Batteries
Remove the cover. Install two AAA size
batteries, then replace the cover.
When the remote control does not operate
normally, check that the “+” and “–” ends of
the batteries are inserted correctly or the
batteries are drained.
➢ Do not mix battery types, i.e. alkaline and manganese.
Connecting to the Headphones
The 3 (headphone) jack is used for watching a television
programme without disturbing the other people in the room.
Prolonged use of headphones at a high volume may damage
your hearing.
➢
When both the front (or side) AV and rear connectors are
connected to external equipment, the front (or side) AV
receives priority.
AA68-03992K-Eng.indd 2 2009-03-04 오전 11:05:54