Sony BDP-S5000ES - Manual (Page 10)

10
A [/1 (on/standby) (page 29)
Turns on the player, or sets to standby
mode.
B 24P indicator (page 46)
Lights up when outputting 1080p/24 Hz
video signals of BD-ROMs.
HD AUDIO indicator
Lights up in the following cases when a
BD is inserted.
– when the audio codec of the title being
played is Dolby Digital Plus, Dolby
TrueHD, DTS-HD High Resolution, or
DTS-HD Master Audio.
– when the audio codec of the title being
played is LPCM 2ch 192 kHz or LPCM
3ch or higher.
SBM (Super Bit Mapping)
indicator
Lights up when “SBM” is set to “On”
(default) in the “Video Settings” setup
and video signal is output from the
HDMI OUT jack (page 47).
C Remote sensor (page 28)
D Disc tray (page 32)
E Blu-ray Disc indicator
Lights up when a BD is recognised.
z
When the player is turned on for the first time,
the Blu-ray Disc indicator lights up, then turns
off when Easy Setup is complete.
F Front panel display (page 11)
G A (open/close) (page 32)
Opens or closes the disc tray.
H N (play) (page 32)
Starts playback.
The indicator lights up during playback.
I X (pause) (page 32)
Pauses playback.
The indicator lights up during pause.
J x (stop) (page 32)
Stops playback.
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent it being
opened by mistake.
When the player is turned on, hold down X
on the player for more than 10 seconds until
“LOCKED” appears in the front panel
display. The disc tray is locked.
To unlock the disc tray, hold down X on the
player until “UNLOCK” appears in the front
panel display.
Front panel