Sony Ericsson GC89 - Manual (Page 84)

84 Troubleshooting
Windows ® 2000
All Windows ® Operating Systems
Error 619: The
port is
disconnected
during dial-up. An ISDN mode (V110 or V120) has been selected when creating a
connection, but is not supported by the network.
Select Analogue mode when creating the connection in the
Connection Wizard.
Error 691:
Access denied,
user name and
password
incorrect on the
domain during
dial-up. The domain name entry is incorrect.
Correct the domain name entry or delete if not required.
Error 718: The
card was unable
to dial during
dial-up. This error indicates a PPP conversation started, but it was
terminated because the remote server did not respond within an
appropriate time. This can be caused by poor line quality or a
problem with the server (ISP). This error can occur when your
modem has connected to the ISP and has sent a username and
password, but there is no response from the server.
Wait a few minutes and try again.
Error 734: The PPP link
control protocol was
terminated during dial-up. The APN entry is incorrect, the signal is weak or the
connection is lost whilst dialing.
If you are experiencing problems contact your network
operator and check the APN.
Error 678: Computer you
are dialing is not
responding during dial-up. Either: Service is not supported by SIM (usually for CSD)
or the computer is not answering.
Check SIM settings with your service provider if necessary.
Make sure that the server you are dialing is OK.
If you are unsure which speed to choose from the Speed
tab, start with Analogue 9600, and check to see if it works.
Once your connection works on Analog, you can try the
V110/V120 settings to see if faster speeds are available.
V110/V120 also connects faster than analog. When
roaming you may need to repeat this procedure to adapt
your settings to the capability of the local network operator.
Connection Failed or
Activation Failed. Please
contact your Service
Provider. No specific reason for failure is available. Wait a few
minutes and try again. If you continue to get this error
check your connection settings or call your service provider
for help.
Connection Failed. Invalid
APN. Please check and
enter the APN again. The APN entry is incorrect, the signal is weak or the
connection is lost whilst dialing. If you are experiencing
problems contact your network operator and check the
APN.