Sub-Zero I663418(R) - Manual (Page 6)

Planning Information
Model I 663418 (R) Pro Island Hood
6
Dimensions in parentheses are in
millimeters unless otherwise specified.
ROOF CAP OR REMOTE BLOWER
18" (457)
HEIGHT OF HOOD
ISLAND HOOD
DUCTWORK INSTALLATION
THROUGH ROOF
34" (864)
DEPTH OF HOOD
10" ROUND DUCT
VERTICAL
DISCHARGE
VERTICAL DISCHARGE ONLY FOR ISLAND HOODS.
TRANSITION
14 1 / 8 "W x 9"D TO 10" ROUND
11"H (INCLUDING FLANGES)
SOFIT, CABINET OR
DUCT COVER
30" TO 36"
(762–914)
COUNTERTOP
TO BOTTOM OF
VENTILATION HOOD
36" (914)
STANDARD
FLOOR TO
COUNTERTOP
HEIGHT
D U C T I N G C O N S I D E R A T I O N S
Pro island hoods are shipped without the blower
assembly. Internal, in-line or remote blower
assemblies are available.
Wolf Pro island hoods have a vertical discharge
location as shown in the illustration below.
IMPORTANT NOTE: Install these ventilation
hoods only with a Wolf blower.
Refer to the Pro ventilation charts at the end of
this section for recommendations and blower
options.
Ducting considerations for
Pro island hoods.