Samsung Digimax L60 - Manual (Page 60)

Important notes
ŝ59Ş
Memory Full!
ҮThere is insufficient memory capacity to take an image
ƍ Insert a new memory card
ƍ Delete unnecessary image files to free up some memory
No Image!
ҮThere are no images stored on the memory
ƍ Take images
ƍ Insert a memory card that is holding some images
File Error!
ҮFile error
ƍ Format the memory card
ҮMemory card error
ƍ Contact a camera service centre
Low Battery!
ҮThere is low battery capacity
ƍ Insert fresh batteries.
Low Light!
ҮWhen taking pictures in dark places
ƍ Take pictures in Flash Photography mode.
Out Of Number
ҮWhen selecting too many printing pages in the PictBridge menu.
ƍ Select printing page within the limitation.
Warning indicator
ƈ There are several warnings that may appear on the LCD display
Card Error!
ҮMemory card error
ƍ Turn off the camera power and turn it on again
ƍ Insert the memory card again
ƍ Insert the memory card and format the memory card. (p.54)
Card Locked!
ҮThe memory card is locked
ƍ SD memory card : Slide the write protect switch to the top of the memory card
ƈ Under certain conditions, static electricity can cause the flash unit to fire. This is
not harmful to the camera and is not a malfunction.
ƈ When images are uploaded or downloaded (when the charger and USB cable
are inserted into the cradle (optional) at the same time), the data transfer may be
affected by static electricity.
In this case, disconnect and re-connect the USB cable before trying the transfer
again.
ƈ Before an important event or going on a trip, you should check the camera
condition.
- Take a picture to test the camera's condition, and prepare spare batteries.
- Samsung cannot be held responsible for camera malfunctions.