Siemens C75 - Manual (Page 91)

Setup 90
© Siem
ens AG 2003
, \\I
tl.e
u\muc\Projekt
e_6
\Sie
mens\ICM
_MP_
CCQ_
S_U
M_RUST\10210-
001_v
or-Ort-Einsatz
\P
ro
duk
te
\C75_
Aries\out-
Tem
plate: X75
, Version 2.2; VAR
Langua
ge: en;
VAR issue
date: 050718
left page (90) of C75 Aries, FUG, w/o ptt, 143mm, en , A31008-H6970-A1-2-7619 (23.09.2005, 12:10)
HTTP profile
The phone default setting varies
from service provider to service pro-
vider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be con-
figured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service pro-
vider in the Internat at this address:
www.siemens.com/
mobilephonescustomercare (page 119).
I
Make the settings.
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be enabled
by the service provider. There are vari-
ations in fax and data reception, de-
pending on the network. Please ask
your service provider about this.
Send voice/fax
b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
b
(Only if no special fax or data number
is available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
End transmission
End transmission with PC-software
and/or press
B
.
Rec. fax/data
b
Your service provider has given you
a number for telephoning and
a fax/data number.
The call is signalled by a special ring-
ing tone and the type of call (fax or
data) is displayed. Now start the
communication program in your PC
to receive the fax/data.