Philips Saeco Odea Giro - Manual (Page 15)

15
2 3
4
1
5 6
DESCALING
DESCALING
When performing a descaling cycle, it is necessary to be present during the entire process
(about 40 minutes).
Caution! Do not use vinegar as a descaler.
The descaling must be done when indicated by the machine. Use a non-toxic, non-harmful descaling
solution. Saeco descaling solution is recommended.
The used solution should be disposed according to the manufacturer instructions and/or regulations in the
country of use.
Note: before starting a descaling cycle make sure that:
1 a container of adequate size is available;
2 if the “Aqua Prima” fi lter is used, make sure that it has been removed.
When the descaling light is
fl ashing, a descaling cycle must
be performed.
Place a large container beneath
the steam spout.
Empty the tank and refi ll it,
dissolving the descaling solution
in a full tank of water.
Press the hot water button.
Turn the knob until the
position is reached. Dispense
the descaling solution into the
container for 15 seconds.
Turn the knob until it is in the
rest position ( ).