Samsung 225UW - Manual (Page 18)

Connecting Cables
Connecting to a Computer
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
Use appropriate connection for your computer.
Using the D-sub (Analog) connector on the video card.
- Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.
[ RGB-IN ]
Using the DVI (Digital) connector on the video card.
- Connect the DVI Cable to the DVI-IN Port on the back of your Monitor.
[ DVI-IN ]
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the
RGB-IN connection cable.
If the monitor and the computer are connected, you can turn them on and use them.
Connecting USB
Turn on your monitor and PC. If you connect the cable to the connector of your
monitor and the cable to the connector of your PC, the installation programs related
to microphone and camcorder are performed automatically.
You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive
by connecting them to the
port of the monitor without connecting them to the PC.