Sharp XL-MP60 - Manual (Page 28)

28
05/1/28 XL-MP60(U).fm TINSEA043SJZZ
XL-MP60
A
d
v
a
n
ced Fea
tures
Enhancing your system
The connection cord is not included. Purchase a commercially avail-
able cord as shown below. ! Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
! Headphones
" Before plugging in or unplugging the headphones, reduce the vol-
ume.
" Be sure your headphones have a 1/8" (3.5 mm) diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
VCR, DVD, etc.
To the line
output jacks
Red
RCA cord
(not supplied)
White
Red
White
1 Use a connection cord to connect the VCR, DVD, etc. to the
VIDEO/AUX IN jacks.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the VIDEO/AUX button.
4 Play the connected equipment.