Socket Mobile CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology - Manual (Page 10)

10 | CHAPTER 2: BASIC SETUP
STEP 5: Insert the Card
Important!
Do NOT insert the card upside down or shove the card in too hard.
Damage may occur!
Pocket PC 2003 only: Wait for the device reset to finish before you insert
the card!
Insert the card into your mobile computer’s slot. Make sure the card is
right-side up, with the blue label on top.
• Insert a CompactFlash or SDIO card directly into a slot of its size.
• If using a PC Card slot, first insert the Bluetooth CF Card into a
CompactFlash-to-PC Card adapter.
When properly inserted, the CF card unit will be fully contained within the
slot. The SDIO card will jut out a little from the slot.
After the mobile computer recognizes the card, the Bluetooth icon will
appear in the task tray (visible in the Today screen for Pocket PCs).
Note: If you bought a kit without a PC Card adapter, they are available
separately from Socket at
www.socketcom.com/shop/default.asp
…or plug the CF card
into an adapter for use in
a PC Card slot.
Insert the card
directly into a
slot of its size…