SATO GT424 - Manual (Page 150)

Section 7: Optional Accessories
Page 7-2 GT Series Operator’s Manual
7.3 LABEL MANAGEMENT ACCESSORIES
¤ Peel unit with mounting winder (factory option)
Mounts on the printer to automatically peel labels from their liner (mounting sheet)
backing sheet. The winder in supplied to roll up the backing sheet neatly for easy dis-
posal by the operator at a later time.
¤ Simplified peel unit (factory option)
Mounts on the printer to automatically peel labels from their liner (mounting sheet)
backing sheet. No winder is supplied to roll the backing sheet neatly.
¤ Cutter Unit (factory option)
Mounts on the printer to automatically cut labels as they are printed.
¤ Cutter Unit for Linerless labels (factory option)
Mounts on the printer to automatically cut linerless labels—that is, labels that are sup-
plied without mounting sheets.
¤ Internal winding unit (factory option)
A winder that mounts inside the printer chassis, to roll up labels as they are printed.
¤ External winding unit (factory option)
A winder that mounts outside the printer chassis, to roll up labels as they are printed.
¤ Detection scanner unit (factory option)
¤ RFID unit (factory option)
Enables the printer to read and write to a specified range of RFID tags and labels.
Instructions for installing each of the above accessories are supplied with the respective prod-
ucts. An authorized SATO reseller can also arrange to install the products on site.
For more information on any of the accessories available for the GT series printers, please con-
tact an authorized SATO dealer near you.