SATO GT424 - Manual (Page 78)

Section 4: Cleaning and Maintenance
Page 4-2 GT Series Operator’s Manual
4.3 HOW TO CLEAN THE PRINTER (CLEANING SET)
If you are using a carbon ribbon, be sure to remove it before cleaning. Follow the instructions
supplied with the cleaning set. Use the items to clean the following parts.
1. Lift up the main cover.
2. Unlatch the print head unit using the head release lever.
The print head is now accessible.
3. Wipe off the dirt on the printer head and paper sen-
sor using a cleaning pen. (See figure on the right)
4. Moisten the cotton cloth with cleaning liquid, and
use the cloth to wipe any dirt or accumulated
adhesive off the platen roller. (See figure on the
right)
5. If you are using linerless labels, also wipe off the dirt
on the fixed cutter blade with a cleaning pen.
Print head Paper Sensor and Label Guide