SMC Networks SMC2635W - Manual (Page 25)

T
HE
W
IRELESS
U
TILITY IN
W
INDOWS
, 98, M
E
, 2000
AND
XP
15
Channel – If you are setting up an ad hoc wireless LAN (See “Network
Topologies” on page 21.), set the channel number to the same radio
channel as that used by the other wireless clients in your group. However,
if you are connecting to a network via an access point, then the channel is
automatically set to the channel of the access point to which the adapter
connects.
The Channel can only be set when the Operating Mode is 802.11 AdHoc.
Note: The available channel settings are limited to local regulations
which determine the number of channels that are available.
• FCC: 11 channels
• MKK: 14 channels
Transmit Rate – Indicates the data transmission rate. Select an
appropriate transmission speed. Lower speeds will give better range.
(Default: Auto.)
Tx Power – Click above or below the slider icon in the Tx Power field to
increase or reduce the transmission power.
Operating Mode – Set the station operation mode to 802.11 AdHoc for
network configurations that do not have an access point, or to
Infrastructure for configurations with an access point (Infrastructure is the
default setting.)
Key Type – Select Hex or ASCII.
Encryption – Wired Equivalent Privacy (WEP) is implemented in the
adapter to prevent unauthorized access. For more secure data
transmissions, set encryption to 128-bit or 64-bit.
The 128-bit setting gives a higher level of security. The setting must be the
same for all clients in your wireless network. (Default: Disabled.)
The WEP (Wired Equivalent Privacy) implemented in SMC’s EZ Connect
Wireless Cardbus Adapter is based on the RC4 encryption algorithm. If