Sony RDR-VX410 User Manual

Page 83

Advertising
background image

83

VCR

R

e

cording

8

Select “to Video,” and press ENTER.

9

Press SYSTEM MENU to turn off the menu.

10

Set the timer on the connected equipment
to the time of the programme you want to
record, and turn it off.

11

Press SYNCHRO REC.

The SYNCHRO REC indicator lights up on
the front panel and the recorder stands by for
Synchro-Rec.
The recorder starts recording when a signal is
received from the connected equipment.
When the connected equipment turns off, the
recording stops and the recorder turns off.

To stop recording

Press x twice.

To cancel Synchro Rec function

Press SYNCHRO REC before recording starts.
The SYNCHRO REC indicator on the recorder
turns off.
If you press SYNCHRO REC during Synchro-
Rec, the recording stops, the SYNCHRO REC
indicator turns off, and the recorder turns off.

If the timer settings of a Synchro-Rec and
another timer recording overlap

Regardless of whether or not the programme is a
Synchro-Rec programme, the programme that
starts first has priority. The recorder starts
recording the second programme about ten
seconds after the first programme has finished. If
the end time of one setting and the start time of
another timer setting is the same, the beginning of
the programme that starts later will be cut.

Notes

• The recorder starts recording only after detecting the

video signal from the connected equipment. The
beginning of the programme may not be recorded
regardless of whether or not the recorder’s power is on
or off.

• To use the connected equipment during Synchro-Rec

standby, cancel the standby mode by pressing
SYNCHRO REC. To return to standby mode again, be
sure to turn off the equipment and press SYNCHRO
REC, before Synchro-Rec starts.

• The Synchro-Rec function does not work with some

tuners. For details, see the tuner’s operating
instructions.

• During Synchro-Rec standby, the Auto Clock Set

function (page 100) does not work.

• After a recording has finished, the recorder enters the

Synchro-Rec standby mode until the SYNCHRO REC
indicator turns off.

• You cannot record on a tape with its safety tab

removed.

• If Synchro-Rec starts with the recorder turned on, the

recorder will turn off when the recording ends.

7:00

8:00

9:00

10:00

Programme 1

Programme 2

will be cut off

Advertising