Southwestern Bell FM2552/FM2000 - Manual (Page 9)

Memory Dialing
Reviewing New Call Records
NOTE: The handset must be in the base to review Caller ID
information.
6. To continue storing numbers, repeat steps 2 through 5. To end,
return the HANDSET to the CRADLE.
To Dial Priority Numbers:
1. Pick up Handset. You will hear a dial tone. Even if you hear an
error message from the telephone company, you may still continue
these memory programming steps
2. Press M1, M2 or M3.
3. Your call will automatically be dialed.
To Dial Frequently Called Numbers:
1. Pick up Handset.
2. Press MEMORY Button.
3. Press the desired memory location
Button (0-9).
4. Your call will automatically be dialed.
To Erase A Stored Number
To erase a stored number, simply store a new number in the same
location. The new number will replace the old one.
Caller ID Features
1. When the Time/Date screen is displayed, press the REVIEW " "or
" " Button, and the display will show the last new call information.
2. Continue pressing the REVIEW" " or " " Button to review all
new call information in the order the calls were received.
3. After the final call has been reviewed, the display will show "END
OF NEW CALL", and the NEW CALL LED will stop flashing.
M2 M3 M1
MEMORY
15 16
1. When the Time/Date screen is displayed, press the " " or " "
Button to select the Caller ID number that you want to dial.
2. Press and release the Caller ID "REDIAL" Button to dial your
desired local or long distance telephone number. The display will
show "PICKUP PHONE".
Caller ID Features
Reviewing Call Records Stored in Memory
NOTE: The handset must be in the base to review Caller ID
information.
1. When the Time/Date screen is displayed, press the REVIEW " " or
" " Button, and the display will show the calls stored in memory.
2. Continue pressing the REVIEW " " or " " Button to display all
call records in the order they were received, from the oldest to the
newest.
3. Continue to review all calls until "END" is displayed.
NOTE :In the Caller ID Review mode, if you want to review the
Caller ID quickly (about 5 records/second), press and HOLD the
REVIEW
Caller ID Redial
The FM2552
allows you to redial a Caller ID record you are
currently reviewing by simply pressing the Caller ID "REDIAL"
Button (on the back of the handset).
When the number is the full ten digit numbers, only the last seven
digits will be dialed if the area code is the same as the programmed
area code. If the area code is different, then the full ten digit number
is displayed and a "1" will automatically be added to the dialing
sequence. The local area code must be programmed in order to fully
utilize the redial feature.
NOTE: The handset must be in the base to review Caller ID
information.
" " or " " Button. The unit will then scroll through
The Caller ID records continuously.
/FM2000