Samsung STP-102S - Manual (Page 3)

1-3. Printer Part Names
5
(1) Cover top
(2) Case top
(3) Case bottom
(4) Control panel
(5) Roller
(6) Power switch
(7) Interface connector (male)
(8) DC Jack
(9) Interface connector (female)
(10) Roll paper
(11) Detector switch
POWER ERROR FEED ON LINE
(1)
FEED ON LINE
(4) (3)
(2)
(5)
(10)
(11)
POWER ERROR
Control Panel
Rear View
Rear View
STP-102S STP-102P
Press the FEED button once to advance paper one line. You can also press the FEED
button continuously to feed paper continuously.
Feed button is valid when ON LINE button is off.
1-4. Operating Control Panel
The control panel has two buttons and two lights.
The control panel buttons perform paper feeding and on line function.
Press the ON LINE button to ready to receive data from the computer.
ON LINE
FEED
Buttons
1) The error LED blinks fast when paper is out.
2) The error LED blinks when the Near End Sensor triggered.
The control panel lights provide information on printer conditions.
The POWER light is on when the printer power is on.
POWER(green)
ERROR(red)
Indicator lights
6
(6) (7) (8) (9)