SEAL 44/62 - Manual (Page 18)

5 PROCESS CONTROL SHEET
Pressure Sensitive Thermal
Application
Unwind
Recommended SEAL
products
Speed Unwind Recommended SEAL products Speed Temp
top Print Shield top Print Guard UV/Jetguard 195 F / 90 C
Rigid Display
bottom Print Mount
2 - 4ft/min
(0.6 -
1.2m/min) bottom Print Mount
2 - 4ft/min
(0.6 -
1.2m/min) off
top Print Shield top Jet Guard 195 F / 90 C
Flexible Display
bottom Carrier board/release paper
2 - 4ft/min
(0.6 -
1.2m/min) bottom ThermaShield
2 - 4ft/min
(0.6 -
1.2m/min) 195/250 F / 90/121 C
top
Print Shield
Floorguard**/Deep
Crystal/Sandtex*
top
Floor Guard/Jet Guard Deep
Crystal
195 F / 90 C
Pop-Up Display
bottom PS Stoplight
2 - 4ft/min
(0.6 -
1.2m/min)
bottom Stoplight 220/320
2 - 4ft/min
(0.6 -
1.2m/min)
195/250 F / 90/121 C
top
Print Shield Floor
Guard**/Sandtex*
top Floor Guard 195 F / 90 C Floor Graphic
bottom Print Mount Removable
2 - 4ft/min
(0.6 -
1.2m/min)
bottom Print Mount Removable
2 - 4ft/min
(0.6 -
1.2m/min)
off
Application
Unwind
Recommended SEAL
products
Speed Unwind Speed Temp
top Print Shield top Jet Guard UV/ThermaShield 195/250 F / 90/121 C
Poster - Roll and
Ship
bottom Carrier board/release paper
2 - 4ft/min
(0.6 -
1.2m/min) bottom Jet Guard UV/ThermaShield
2 - 4ft/min
(0.6 -
1.2m/min) 195/250 F / 90/121 C
top Print Shield top Jet Guard UV/ThermaShield 195/250 F / 90/121 C
Presentation
Board
bottom Print Mount
2 - 4ft/min
(0.6 -
1.2m/min) bottom Print Mount
2 - 4ft/min
(0.6 -
1.2m/min) off
top OptiMount Ultra top
Backlit Display
bottom Carrier board/release paper
2 - 4ft/min
(0.6 -
1.2m/min) bottom
top Print Shield top Print Guard UV 195 F / 90 C
Vinyl Banner
bottom Place printed media on
bottom unwind and/or use
release paper
2 - 4ft/min
(0.6 -
1.2m/min)
bottom
Place printed media on bottom
unwind and/or use release paper
2 - 4ft/min
(0.6 -
1.2m/min)
off
For best results, encapsulation applications are recommended for dual heated roller operation only.
NOTE: in some applications, the performance of pressure-sensitive films & adhesives can be improved by applying them warm (125F (50C)).
* Only available in Europe ** Only available in the US
Figure 10