Sony CDP-X5000 - Manual (Page 16)

Recording From CDs
16 GB
Fading In or Out
You can manually fade in or out to prevent tracks from
starting or ending abruptly.
Note that you cannot use this effect when using the
DIGITAL OUT connections.
Changing the fading time
You can change the fading time from 2 to 10 seconds
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.
1
Press FADER on the remote before you start
playing.
“5 SEC” appears and “FADE” flashes in the
display.
2
Press the number button (2 - 10) to specify the
fading time.
(Or press 0 or ) repeatedly until desired time
is displayed.)
Notes
• The fading time remains even when you turn off the
player.
• When you use the Custom File function (page 18), the
fading time is memorized for each disc.
Æ P p
)
)
0
0
+
c
=
C
Number
buttons
0 / )
FADER
To
Start play fading in
End play fading out
Press FADER
in pause mode. “FADE” flashes
and play fades in.
when you want to start fading out.
“FADE” flashes. The play fades
out and the player pauses.
Useful Tips for Recording
Using these functions makes recording CDs more
convenient.
Adjusting the Recording Level (Peak
Search)
The player locates the highest level among the tracks to
be recorded to let you adjust the recording level before
you start recording.
1
Before you start playing, press PEAK SEARCH on
the remote.
“PEAK” flashes in the display and the player
repeats the portion of the highest level for about
four seconds.
2 Adjust the recording level on the deck.
3
Press p on the player to stop Peak Search.
“PEAK” disappears from the display.
Note
The portion with the highest level may differ every time you
try the adjustment on the same disc. The difference is,
however, so slight that you should not have any problem in
adjusting the recording level precisely.
Æ P p
)
)
0
0
+
c
=
C
PEAK SEARCH
p
SPACE