Samsung C01 - Manual (Page 45)

SiPTel C01 IP Phone User Manual
STEP 3 If the call is connected to the destination party successfully, the call starting time, and call
duration time will be displayed on the LCD.
If you can see the icon on the LCD, you can start to speak over
the phone.
5.3.
Making a PSTN call
To use PSTN mode, you need to connect the PSTN port of SiPTel IP Phone to the phone line. Please
remember, you are not allowed to make any local call when you are in Dialup because your phone line is
already connected to local ISP for Internet to make VoIP calls.
If Broadband cable is used for VoIP registration and the PSTN port is connected to the PSTN network,
you can still make a PSTN call by pressing ‘PSTN’ button on the key pad of the SiPTel IP Phone.
In case the broadband is unavailable or your account is not registered our ITSP service, it’s impossible to
use VoIP mode. In this case, the SiPTel IP Phone will be changed to the PSTN mode automatically when
you go off hook.
STEP 1 Press the ‘PSTN’ key on the key pad of the SiPTel IP Phone.
When you are using PSTN mode, you can see the [PSTN] message
on the LCD.
If you can dial tone, start dialing the destination number.
5.4. Making a call in Phone Book mode
STEP 1 Press ‘P-BOOK’ button, or press ‘MENU’ and select “2: Phone Book”.
STEP 2 Select ‘1 : Find Number’ in Phone Book menu.
STEP 3 Select either ‘By Index’ or ‘By Name’.
STEP 4 Enter the INDEX number or NAME and press OK button.
STEP 5 Pick up the handset. The call will be made to the select number.
12:00 [00:37]
021231234
A 12:00
[PSTN]
A 12:00