Sony Ericsson K850i - Manual (Page 25)

23 Calling
3 Record a voice command such
as “John mobile”.
4 Follow the instructions that appear.
Wait for the tone and say the
command to record. The voice
command is played back to you.
5 If the recording sounds OK, select
Yes . If not, select No and repeat steps
3 and 4 .
To rerecord a voice command
1 From standby select Menu > Settings
> the General tab > Voice control
> Voice dialing > Edit names .
2 Scroll to a command and select
Options > Replace voice .
3 Wait for the tone and say the command.
Voice dialing
You can hear your recorded contact
name when you receive a call from
that contact.
To voice dial
1 From standby press and hold down
a volume key.
2 Wait for the tone and say a recorded
name, for example “John mobile”.
The name is played back to you and
the call is connected.
The magic word
You can record and use a voice
command as a magic word to activate
voice dialing without pressing any
keys. Your handsfree must be
connected to your cell phone when
using the magic word.
To activate and record the magic
word
1 From standby select Menu > Settings
> the General tab > Voice control
> Magic word > Activate .
2 Follow the instructions that appear
and select
Cont. Wait for the tone and
say the magic word.
3 Select Yes to accept or No for a new
recording.
4 Follow the instructions that appear
and select
Cont.
5 Select where your magic word is
to be activated.
To make a call using the magic word
1 In standby make sure is visible.
2 Say the magic word.
3 Wait for the tone and say a voice
command.
Voice commands are saved in the phone
memory only. They cannot be used in
another cell phone.
You should choose a long, unusual
word or phrase that can easily be
distinguished from ordinary background
speech. Bluetooth handsfree does not
support this feature.
This is the Internet version of the User's guide. © Print only for private use.