Samsung 20080303092219921 - Manual (Page 16)

31
ENG
30
OPERA
TION
• C-WIDTH : This sets the width of the center image. The higher the setting, the
less sound comes from the center speaker.
• DIMENSION : Incrementally adjusts the sound field (DSP)from the front or surround.
• PANORAMA : This mode extends the front stereo image to include the surround
speakers for an exciting "wraparound" effect with side wall imaging.
Dolby Pro Logic llx effect
Setting Dolby Pro Logic llx effect
This function works only in Dolby PRO LOGIC IIx MUSIC Mode.
Press SETUP/MENU button, and then press the ENTER
button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “ MODE”,
and then press the ENTER button.
Press button.
• Each time you press this button,
C-WIDTH
➝ DIMENSION ➝
PANORAMA will be selected in turn.
Press …† button to set the
Dolby Pro Logic llx effect you
want.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
1
2
3
4
1 Press MODE button to select ‘MUSIC’ Mode.
2 Press EFFECT button.
• Each time you press this button, C-WIDTH ➝ DIMENSION ➝ PANORAMA
will be selected in turn.
3 Press …† button to select Dolby Pro Logic IIx effect you want.
• C-WIDTH : You can set from 0 to 7.
• DIMENSION : You can set from -7 to +7.
• PANORAMA : You can set it ON or OFF.
Using the EFFECT button
Setting NEO:6 mode
You can play back 2 channel sound over 6.1 channels when enjoying music or a movie.
Press SETUP/MENU button, and then press the ENTER button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press button to select the “NEO:6 MODE”, and then
press the ENTER button.
• “CEN -- IMG : 2” appears on the display.
Press …† button to set the sound image you want.
• You can set the sound image from 0 to 5.
• This parameter adjusts the height of the center image through the front and
center speakers. “0” is the lowest while “5” is the highest.
To exit setup mode
• Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.
REMOTE CONTROL
1
2
3
This mode decodes 2 channel signals to a high precision digital matrix decoder.
for 6.1 channel sound.
• MUSIC : NEO:6 MUSIC mode is optimized for music playback
• CINEMA : NEO:6 CINEMA mode is optimized for movie playback.
NEO : 6 Mode
• NEO:6 mode cannot be used with DTS and Dolby Digital multi channel signals.
• Pro Logic works only for PCM audio signals with sampling frequencies of
32KHz, 44KHz or 48KHz.
If your TV (or screen) is installed high on a wall, you can raise the center
sound image of the front and center speakers to compensate.
To set the height of the center sound image
Press NEO:6 MODE button.
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
Press SURROUND button briefly to select “NEO:6” mode.
• Each time you press this button, DPLIIx ➝ NEO:6 ➝ SFE ➝ STEREO will
be selected in turn.
Press SELECT( ) button.
• Each time you press this button, MUSIC ➝ CINEMA will be selected in turn.
MAIN UNIT
1
2 ,
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 30