Samsung 20080303092219921 - Manual (Page 14)

27
ENG
26
OPERA
TION
Test tone
Use the test tone check the speaker connection status or level.
√
To automatically output test tone
Press SETUP/MENU button, and then press the ENTER
button.
• “SETUP MODE” appears on the display and the unit goes into Setup Mode.
Press button to select the “TEST-T AUTO”,
and then press the ENTER button.
• Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝
S.R ➝ SBR ➝ SBL ➝ S.L ➝ S.W .
• During test signal output, press …† button to adjust the individual speaker
output level from -10 to +10 dB by 1 step.
1
2
To stop test tone
• Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
Press TEST TONE button.
• Test signal will be automatically output as follows; F.L ➝ CEN ➝ F.R ➝ S.R ➝
SBR ➝ SBL ➝ S.L ➝ S.W.
• During test tone output, press …† button to adjust the speaker output level from
-10 to +10 dB by 1 step.
Using the Test Tone button
√
To Manually Output Test Tone
• F.L (front left) : -10 ~ +10dB
• CEN (center) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB
• SBR (surround back right) : -10 ~ +10dB
• SBL (surround back left) : -10 ~ +10dB
• S.L (surround left) : -10 ~ +10dB
• S.W (subwoofer) : -10 ~ +10dB
Test Tone Output
Press SETUP/MENU button, and then press the ENTER
button.
• “SETUP MODE” appears on the display and goes into Setup Mode.
Press ➛☎❿ button to select the “TEST-T MANU”, and then
press the ENTER button.
Press ➛☎❿ button to select the speaker you want..
• Each time you press ➛☎❿☎button, F.L ➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝
S.L ➝ S.W will be selected in turn.
Press …† button to set the test tone as you want.
• You can adjust the speaker output level from -10 to +10dB by 1 step.
• The sound gets quieter at -10dB and louder at +10dB.
1
2
3
4
To stop test tone
• Press SETUP/MENU button once time.
“SETUP OFF” appears on the display and test tone stops.
HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 26