Setting speaker level, Dolby pro logic llx mode, Main unit – Samsung 20080303092219921 User Manual

Page 15: Remote control

Advertising
background image

29

ENG

28

F.L (front left) : -10 ~ +10dB

CEN (center) : -10 ~ +10dB

F.R (front right) : -10 ~ +10dB

S.R (surround right) : -10 ~ +10dB

SBR (surround back right) : -10 ~ +10dB

SBL (surround back left) : -10 ~ +10dB

S.L (surround left) : -10 ~ +10dB

S.W (subwoofer) : -10 ~ +10dB

Setting Speaker Level

OPERA

TION

Setting speaker level

You can set the balance and level of speakers.

Press SETUP/MENU button, and then press the ENTER
button.

“SETUP MODE” appears on the display and goes into Setup Mode.

Press

button to select the “LEVEL SETUP”, and then

press the ENTER button.

Press

button to select the speaker you want.

Each time you press

button, F.L

➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL

➝ S.L ➝ S.W will be selected in turn.

Press

…†

button to set the speaker mode.

You can adjust it from -10 to +10dB by 1 step.

The sound gets quieter at -10dB and louder at +10dB.

1

2

3

4

To exit setup mode

Wait for about 5 seconds or press SETUP/MENU button.
“SETUP OFF” appears on the display and Setup Mode is exited.

1 Press SPK LEVEL button to select the speaker you want.

Each time you press this button, F.L

➝ CEN ➝ F.R ➝ S.R ➝ SBR ➝ SBL ➝ S.L

➝ S.W ➝ SPK LVL OFF will be selected in turn.

2 Press …† button to set the speaker level you want.

You can adjust it from -10 to +10dB by 1 step.

The sound gets quieter at -10dB and louder at +10dB.

Using the SPK LEVEL button

MUSIC : Provides 7.1 channel surround sound for digital, analog or existing stereo
sources such as CD, TAPE, FM, TV and stereo VCR.

CINEMA : Adds realism to the movie soundtrack.

MATRIX : You will hear 7.1 channel surround sound.

GAME : Enhances the excitement of the game's sound.

PL : You will experience a surround effect with just the front left and right speakers.

Press SURROUND button to select “DPLIIx” mode.

Each time you press this button, DPLIIx

➝ NEO:6 ➝ SFE ➝ STEREO

will be selected in turn.

Press SELECT( ) button.

Each time you press SELECT ( ) button, CINEMA

➝ MATRIX ➝

GAME

➝ PL ➝ MUSIC will be selected in turn.

Each time you press SELECT ( ) button, MUSIC

➝ PL ➝ GAME ➝

MATRIX

➝ CINEMA will be selected in turn.

Dolby Pro Logic llx mode

MAIN UNIT

1

2

,

Dolby Pro Logic llx mode

This mode provides 7.1 channel sound from 2 channel sources.

Press MODE button.

Each time you press this button, CINEMA

➝ MATRIX ➝ GAME

➝ PL ➝ MUSIC will be selected in turn.

To exit setup mode

Wait for about 5 seconds.

REMOTE CONTROL

You cannot use Dolby Pro Logic llx mode for multi channel signals such as
Dolby Digital and DTS.

Pro Logic works only for PCM audio signals with sampling frequencies of
32KHz, 44KHz or 48KHz.

Sound will not be output from the surround back speaker if the PCM audio signal
is mono.

HT-AS720S-XAC-ENG 2008.1.25 3:16 PM Page 28

Advertising
This manual is related to the following products: