Sony 4-169-142-13(1) - Manual (Page 20)

20
BD/DVD-ROM 1080/24p Output
YCbCr/RGB (HDMI)
HDMI Deep Colour Output
Pause Mode
Audio Settings
Audio (HDMI)
DSD Output Mode
BD Audio MIX Setting
Dolby Digital (Coaxial / Optical)
DTS (Coaxial / Optical)
Auto Outputs 1920 × 1080p/
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HDMI OUT jack.
Off Select this when your TV is
not compatible with 1080/
24p video signals.
Auto Automatically detects the
connected TV type, and
switches to the matching
colour setting.
YCbCr (4:2:2) Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4) Outputs YCbCr 4:4:4 video
signals.
RGB Outputs RGB video signals.
Auto Normally select this.
12bit Outputs 12bit/10bit video
signals when the connected
TV is compatible with Deep
Colour.
10bit
Off Select this when the picture
is unstable or colours appear
unnatural.
Auto Normally select this.
Dynamic moving pictures
appear without blurring.
Frame Displays static pictures at
high resolution.
Auto Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM Outputs PCM signals from
the HDMI OUT jack.
On Outputs DSD signals from
the HDMI OUT jack when
playing a Super Audio CD.
When “On” is selected, no
signal is output from other
jacks.
Off Outputs PCM signals from
the HDMI OUT jack when
playing a Super Audio CD.
On Outputs the audio obtained
by mixing the interactive
and secondary audio to the
primary audio.
Off Outputs the primary audio
only. Select this to output
HD audio signals to an AV
amplifier (receiver).
Downmix
PCM Converts to output Linear
PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
Downmix
PCM Converts to output Linear
PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS Select this when connecting
to an audio device with a
built-in DTS decoder.