Snapper ZT20501BV - Manual

MANUAL No. 5100269 (Rev. IR - 7/1/05)
McDonough, GA 30253 USA
Safety Instructions & Operator’s Manual for
FastCut HYDRO DRIVE ZTR
SERIES 1
MODEL
ZT18441KHC
ZT19441KWV
ZT20501BV
COPYRIGHT © 2005
SNAPPER - A DIVISION OF SIMPLICITY MFG., INC.
ALL RIGHTS RESERVED
Thank you for buying a SNAPPER Product! Before operating your machine, read this manual carefully and
pay particular attention to the “IMPORTANT SAFETY INSTRUCTIONS” on pages 2 - 4. Remember that all
power equipment can be dangerous if used improperly. Also keep in mind that SAFETY requires careful use
in accordance with the operating instructions and common sense!
MODEL NUMBER EXPLANATION
Z T 20 50 1 B V
DRIVE SYSTEM TYPE
MOWER ORIENTATION
ENGINE HP *
MOWER DECK SIZE ENGINE TYPE
ENGINE BRAND
SERIES DESIGNATION
POWER UNIT
Z - Zero Turning - Hydro Drive
T - Twin Stick Control
18 - Engine Horse Power
19 - Engine Horse Power
1 - Series Designation
KH - Kohler Engine
KW - Kawasaki Engine
B - Briggs & Stratton Engine
C - Dual Cam OHV
V - Overhead Valve
20 - Engine Horse Power
44 - 44" Mower Width
50 - 50" Mower Width
NOTE: Specifications are correct at the time of printing and are subject to change without notice.
* Actual sustained equipment horsepower will likely be lower due to operating limitation and environmental factors.