SMC Networks SMC2582W-B - Manual (Page 13)

Fig. 4. Connecting a managing computer and an SMC2582W-B via Ethernet.
You can use either a cross-over Ethernet cable (included in the package) or a switch/hub with 2 nor-
mal Ethernet cables.
NOTE: One connector of the Ethernet cable must be plugged into the LAN/CONFIG Ethernet jack
of the SMC2582W-B for configuration.
2.3.2. Changing the TCP/IP Settings of the Managing Computer
Use the Windows Network Control Panel Applet to change the TCP/IP settings of the managing
computer, so that the IP address of the computer and the IP address of the SMC2582W-B are in the
same IP subnet. Set the IP address of the computer to 192.168.2.xxx (the default IP address of the
SMC2582W-B is 192.168.2.50) and the subnet mask to 255.255.255.0.
TIP: You can use SMC2582W-B Configuration Utility on the companion CD-ROM to scan
for all the SMC2582W-Bs on the network. Double-click a scanned SMC2582W-B to launch
the Web browser to manage the SMC2582W-B. Note that this utility does not discover the
SMC2682W.
NOTE: On Windows 2000/XP, SMC2582W-B Configuration Utility can only be run by a
user with administrator privilege.
NOTE: For some versions of Windows, the computer needs to be restarted for the
changes of TCP/IP settings to take effect.
13