Sears SRCD227 - Manual (Page 10)

- 10 - EN
1C29
20. AUDIO L/R input jacks
Connect to the audio output jacks of a video
camera or VCR. To access the front A/V input
see ITEM 11 or ITEM 23.
21. Cassette compartment
22. PICTURE button
Press to adjust the picture.
23. Number buttons
TV Mode:
[P.15]
Press two digits to directly access the desired
channel.
Remember to press a "0" before a single digit
channel.
+100 button–
Press to select cable channels which are equal or
greater than number 100.
DVD Mode:
Press to enter the desired number.
+10 button–
Press to enter the desired numbers which are
equal or greater than number 10.
00 Numbers–
By pressing the numbers 00 automatically switch-
es the TV to the front A/V input.
24. PAUSE button [TV/VCR P.26 / DVD P.38]
Pauses the current disc or tape operation.
25. SPEED button [TV/VCR P.30]
Press to choose the desired recording speed:
SP/SLP.
26. C.RESET button [TV/VCR P.28]
Press to reset counter to 0:00:00.
Press to cancel a setting of timer program. (See
page 33.)
27. DISPLAY button
TV/VCR Mode:
Display the counter or the current channel number
and current time on the TV screen.
DVD Mode: [P.43]
Displays the current status on the TV screen for
checking purposes.
28. SETUP button [TV/VCR P.15]
Press to enter or exit the TV menu or DVD setup
mode.
29. TITLE button [DVD P.37]
Displays the title menu.
30. CLEAR button
Resets a setting.
31. MODE button [DVD P.41]
Activates program playback or random playback mode.
32. SEARCH MODE button [DVD P.39]
Press to locate a desired point.
33. AUDIO button [DVD P.44]
Press to select a desired audio language or sound
mode.
34. SUBTITLE button [DVD P.45]
Press to select a desired subtitle language.
35. REPEAT button [DVD P.40]
Repeats playback of the current disc, title, chapter
or track.
36. ANGLE button (DVD mode) [DVD P.45]
Press to change the camera angle to see the
sequence being played back from a different angle.
37. A-B REPEAT button [DVD P.40]
Repeats playback of a selected section.
38. RETURN button
Returns to the previous operation.
39. ENTER button
Press to accept a setting.
40. Arrow buttons
TV/VCR Mode:
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
Use when making settings while watching the
display on a TV screen.
41. DISC MENU button [DVD P.37]
Displays the menus in the DVD.
42. ZOOM Button [DVD P.42]
Enlarges part of a DVD-reproduced image.
43. MUTE button
Mutes the sound. Press it again to resume sound.
44. SLEEP button [TV/VCR P.34]
Sets the Sleep Timer. (See page 34.)
45. SELECT button
Press to switch TV/VCR and DVD mode. You can
see the mode (TV/VCR or DVD) on the front
panel indicator.
- TV/DVD/VHS REAR PANEL - [Fig.3]
TD530/601_01-36 02.4.5 6:33 PM Page 10