Samsung SP-A900B - Manual (Page 29)

1) Color Temperature 5) R-Offset
2) R-Gain 6) G-Offset
3) G-Gain 7) B-Offset
4) B-Gain
G-Offset
B-Offset
8) Gamma : An image compensation function that controls the settings according to the
video properties.
- Film : The best setting for watching a film.
- Video : The best setting for watching a TV program.
- Graphic : The best setting when you have a PC connected.
Gamma
9) DynamicBlack™ : Adjusts the brightness and contrast of the screen by adjusting the
tightening thread in the optical system.
- Off : You can view the screen where the brightness is emphasized by opening the
tightening thread fully.
- Manual : You can view the screen while manually controlling the iris value from
minimum to maximum
- Auto : You can view a more dynamic screen as the input screens are adjusted
automatically.
Dynamic
Black™
10) Save : Used to save custom picture settings.
Save
11) Reset : Restores the mode settings to the factory defaults.
Reset
Size You can select a screen size according to the type of scene.
▶ Refer to "Size Support Mode" .
1) 16 : 9
2) Zoom1
3) Zoom2
4) Wide Fit
5) Anamorphic
6) 4 : 3
Position Adjust the screen position if it is not aligned.
▶ Refer to "Position Moving Support Mode" .
Digital NR When a dotted line is displayed or the screen shakes, you can view picture in better
visual quality by enabling Noise Reduction.
▶ Digital NR can only be selected in [Video], [S-Video], [Component 1, 2] and [PC]
modes.
Black Level Using the Black Level function, you can set the light level of the darkest portion of the
video signal so that you can clearly see dark areas on the screen.
▶ The Black Level can only be selected in [Video], [S-Video] and [HDMI] modes.
▶ For [Video] and [S-Video] Modes
▶ For [HDMI] Mode
1) 0 IRE : Sets the light level of the darkest portion of the video signal to low. If the
setting does not match the input signal, the dark screen looks milky-white.
2) 7.5 IRE : Sets the light level of the darkest portion of the video signal to high. If
the setting does not match the input signal, the dark screen is saturated and may
not display properly.
1) Low : Set the brightness standard for dark signals to a low setting.
If the input signal is an ' HDMI-Video ' type, unclear screens are displayed
normally.
2) Normal : Set the brightness standard for dark signals to a high setting.
If the input signal is an ' HDMI-PC ' type, dark screens are displayed bright.
Color Pattern You can filter the color of the entire screen according to your taste.