Samsung DA99-01220J - Manual (Page 4)

4
SAFETY INSTRUCTIONS
PROPER DISPOSAL OF THE REFRIGERATOR
Before you throw away your old refrigerator or freezer
When disposing of this or other
refrigerators, remove the door/door seals,
door latch so that small children or animals
cannot get trapped inside.
Leave the shelves in place so that children
may not easily climb inside.
R600a or R134a is used as a refrigerant.
Check the compressor label on the rear of
the appliance or the rating label inside the
fridge to see which refrigerant is used for
your refrigerator.
when this product contains flammable gas
(Refrigerant R600a) contact your local
authority with regard to safe disposal of this
product.
Cyclopentane used as a insulation
blowing gas.
The gases in the insulation material require
special disposal procedure. Please dispose
of the packaging material for this product in
an environmentally friendly manner. Please
contact your local authorities in regard to the
environmentally safe disposal of this product.
This product contains flammable insulation
blowing gas.
Please dispose of the packaging
material for this product in an
environmentally friendly way.
CAUTIONS
• The refrigerant used in the refrigerator/freezer and the gases in the insulation
material require special disposal procedures. Ensure that none of the pipes
on the back of the appliance are damaged prior to disposal.
WARNING
HOW TO CONNECT ELECTRICITY
When moving the refrigerator, be careful not
to roll over or damage the power cord.
Do not insert the power cord with wet hands.
Unplug the refrigerator before cleaning and
making repairs.
Do not use a wet or damp cloth when cleaning the
plug. Remove any foreign matter or dust from the
power plug pins. Otherwise there is a risk of fire.
If the refrigerator is disconnected from the power
supply, you should wait for at least five minutes
before plugging it back.
Unplug the appliance from the power supply
before changing the interior light of the
refrigerator. Otherwise, there is a risk of
electric shock.
If you experience difficulty when changing the light,
contact your service center.
Incase of LED lamp, don’t change the interior light
of the refrigerafor at your own risk, ask the service
agent.
If the wall socket is loose, do not insert the
power plug. There is a risk of electric shock
or fire.
The appliance must be located where the
plug is easily accessible.
The refrigerator should always be plugged into
its own individual electrical outlet which has a
voltage rating that matches the rating plate.
This provides the best performance and also
prevents overloading house wiring circuits, which
could cause a fire hazard from overheated wires.
Never unplug your refrigerator by pulling
the power cord. Always grip plug firmly and
pull straight out from the outlet.
Make sure that the power plug is not
squashed or damaged by the back of the
refrigerator.
Do not bend the power cord excessively or
place heavy articles on it.
Have the power code repaired or replaced
immediately by the manufacturer or its service
agent if the power cord has become frayed or
damaged. Do not use a cord that shows cracks or
abrasion damage along its length or at either end.
If the power cord is damaged, have it replaced
immediately by the manufacturer or its service
agent.
DA99-01220J-EN-1(0.2).indd 4 2007.3.7 4:32: PM