Document Outline

• Chapter 1: Introduction 1-1
• Chapter 1: Introduction
  • Package Checklist
  • Hardware Description
    • Component Description
      • Antennas
      • LED Indicators
      • Security Slot
      • Console Port
      • Ethernet Port
      • Reset Button
      • Power Connector
  • Features and Benefits
  • System Defaults
• Chapter 2: Hardware Installation
• Chapter 3: External Antennas
  • Installation Procedures
• Chapter 4: Network Configuration
  • Network Topologies
    • Ad Hoc Wireless LAN (no Access Point)
    • Infrastructure Wireless LAN
    • Infrastructure Wireless LAN for Roaming Wireless PCs
    • Infrastructure Wireless Bridge
    • Infrastructure Wireless Repeater
• Chapter 5: Initial Configuration
  • Initial Setup through the CLI
    • Required Connections
    • Initial Configuration Steps
  • Logging In
• Chapter 6: System Configuration
  • Advanced Configuration
    • System Identification
    • TCP / IP Settings
    • RADIUS
    • SSH Settings
      • SSH Settings
    • Authentication
    • Filter Control
    • VLAN
    • WDS Settings
    • AP Management
    • Administration
      • Changing the Password
      • Upgrading Firmware
    • System Log
      • Enabling System Logging
      • Configuring SNTP
  • SNMP
    • Configuring SNMP and Trap Message Parameters
    • Configuring SNMPv3 Users
    • Configuring SNMPv3 Trap Filters
    • Configuring SNMPv3 Targets
  • Radio Interface
    • Configuring VAP Radio Settings
    • Configuring Rogue AP Detection
    • Configuring Wi-Fi Multimedia
    • Security
      • Enabling the VAPs
      • Wired Equivalent Privacy (WEP)
      • Wi-Fi Protected Access (WPA)
      • Configuring 802.1X
  • Status Information
    • Access Point Status
    • Station Status
    • Event Logs
• Chapter 7: Command Line Interface
  • Using the Command Line Interface
    • Accessing the CLI
    • Console Connection
    • Telnet Connection
  • Entering Commands
    • Keywords and Arguments
    • Minimum Abbreviation
    • Command Completion
    • Getting Help on Commands
      • Showing Commands
    • Partial Keyword Lookup
    • Negating the Effect of Commands
    • Using Command History
    • Understanding Command Modes
    • Exec Commands
    • Configuration Commands
    • Command Line Processing
  • Command Groups
  • General Commands
    • configure
    • end
    • exit
    • ping
    • reset
    • show history
    • show line
  • System Management Commands
    • country
    • prompt
    • system name
    • username
    • password
    • ip ssh-server enable
    • ip ssh-server port
    • ip telnet-server enable
    • ip http port
    • ip http server
    • ip https port
    • ip https server
    • web-redirect
    • APmgmtIP
    • APmgmtUI
    • show apmagement
    • show system
    • show version
    • show config
    • show hardware
  • System Logging Commands
    • logging on
    • logging host
    • logging console
    • logging level
    • logging facility-type
    • logging clear
    • show logging
    • show event-log
  • System Clock Commands
    • sntp-server ip
    • sntp-server enable
    • sntp-server date-time
    • sntp-server daylight-saving
    • sntp-server timezone
    • show sntp
  • DHCP Relay Commands
    • dhcp-relay enable
    • dhcp-relay
    • show dhcp-relay
  • SNMP Commands
    • snmp-server community
    • snmp-server contact
    • snmp-server location
    • snmp-server enable server
    • snmp-server host
    • snmp-server trap
    • snmp-server engine-id
    • snmp-server user
    • snmp-server targets
    • snmp-server filter
    • snmp-server filter-assignments
    • show snmp groups
    • show snmp users
    • show snmp group-assignments
    • show snmp target
    • show snmp filter
    • show snmp filter-assignments
    • show snmp
  • Flash/File Commands
    • bootfile
    • copy
    • delete
    • dir
    • show bootfile
  • RADIUS Client
    • radius-server address
    • radius-server port
    • radius-server key
    • radius-server retransmit
    • radius-server timeout
    • radius-server port-accounting
    • radius-server timeout-interim
    • radius-server radius-mac-format
    • radius-server vlan-format
    • show radius
  • 802.1X Authentication
    • 802.1x
    • 802.1x broadcast-key-refresh-rate
    • 802.1x session-key-refresh-rate
    • 802.1x session-timeout
    • 802.1x-supplicant enable
    • 802.1x-supplicant user
    • show authentication
  • MAC Address Authentication
    • address filter default
    • address filter entry
    • address filter delete
    • mac-authentication server
    • mac-authentication session-timeout
  • Filtering Commands
    • filter local-bridge
    • filter ap-manage
    • filter uplink enable
    • filter uplink
    • filter ethernet-type enable
    • filter ethernet-type protocol
    • show filters
  • WDS Bridge Commands
    • bridge role (WDS)
    • bridge-link parent
    • bridge-link child
    • bridge dynamic-entry age-time
    • show bridge aging-time
    • show bridge filter-entry
    • show bridge link
  • Spanning Tree Commands
    • bridge stp enable
    • bridge stp forwarding-delay
    • bridge stp hello-time
    • bridge stp max-age
    • bridge stp priority
    • bridge-link path-cost
    • bridge-link port-priority
    • show bridge stp
  • Ethernet Interface Commands
    • interface ethernet
    • dns server
    • ip address
    • ip dhcp
    • speed-duplex
    • shutdown
    • show interface ethernet
  • Wireless Interface Commands
    • interface wireless
    • vap
    • speed
    • multicast-data-rate
    • channel
    • transmit-power
    • radio-mode
    • preamble
    • antenna control
    • antenna id
    • antenna location
    • beacon-interval
    • dtim-period
    • fragmentation-length
    • rts-threshold
    • super-g
    • description
    • ssid
    • closed-system
    • max-association
    • assoc-timeout-interval
    • auth-timeout-value
    • shutdown
    • show interface wireless
    • show station
  • Rogue AP Detection Commands
    • rogue-ap enable
    • rogue-ap authenticate
    • rogue-ap duration
    • rogue-ap interval
    • rogue-ap scan
    • show rogue-ap
  • Wireless Security Commands
    • auth
    • encryption
    • key
    • transmit-key
    • cipher-suite
    • mic_mode
    • wpa-pre-shared-key
    • pmksa-lifetime
    • pre-authentication
  • Link Integrity Commands
    • link-integrity ping-detect
    • link-integrity ping-host
    • link-integrity ping-interval
    • link-integrity ping-fail-retry
    • link-integrity ethernet-detect
    • show link-integrity
  • IAPP Commands
    • iapp
  • VLAN Commands
    • vlan
    • management-vlanid
    • vlan-id
  • WMM Commands
    • wmm
    • wmm-acknowledge-policy
    • wmmparam
• Appendix A: Troubleshooting
• Appendix B: Cables and Pinouts
  • Twisted-Pair Cable Assignments
    • 10/100BASE-TX Pin Assignments
    • Straight-Through Wiring
    • Crossover Wiring
  • Console Port Pin Assignments
    • Wiring Map for Serial Cable
• Appendix C: Specifications
  • General Specifications
  • Sensitivity
  • Transmit Power
    • Operating Range
• Glossary
• Index