Sunbeam 6911 - Manual (Page 3)

 
W
all
M
ount
M
odels
Rotate back of unit counterclockwise 1/4-turn. Carefully thread swivel ball onto the end of
the shower arm, over the Teflon tape, and hand tighten as firmly as possible.
NOte:
should additional tightening be necessary
,
cover the
swivel ball with a soft cloth
,
to prevent Marring and
tighten with pliers
do not turn More than 1/4 turn.
Position your Sunbeam showerhead as desired and tighten back of unit. Slowly turn on
cold water and check for leaks. If leaks occur, wrap a soft cloth around the swivel ball and
re-tighten with pliers. DO NOT OVER TIGHTEN.
o
peratIng
I
nstructIons
To select a setting, turn the selector tab to the desired position. The selector tab will align
with the red symbol designating which setting you have chosen.
Spray/Massage
Bubble
Massage Massage/Bubble
Full Spray Spray Mist
Spray Bubble Mist
c
are
& c
leanIng
If you notice a drop in water pressure or skewing of water streams, place unit in a vinegar
solution (1 part vinegar to 3 parts water). Allow to soak overnight. Remount showerhead
and run cold water through it for several minutes.
Backside
Swivel Ball