Incoming calls – Sony P910a User Manual

Page 42

Advertising
background image

Phone

42

This is the Internet version of the user’s guide. © Print only for private use.

To make an emergency call

Enter the emergency number on the keypad and press

or

the Jog Dial.

Usually, but not always, no SIM card or PIN code is required for
emergency calls and you will be able to make the call as long as
you have coverage from a GSM network. Check with your local
provider to find out if emergency calls are possible without a
SIM card, and which emergency call numbers are supported.

To end a call

Press

, or press the Jog Dial.

Shortcuts

• Press and hold

to dial your voicemail. With the flip

open, select

Phone > Call voicemail

.

See ‘Voicemail’ on page 55 on how to set up voicemail.

• Press any of the keys from

to

followed by

to call a speed dial number.

• Press

twice to call the last dialed number.

• Press and hold any of the keys from

to

to open

your Contact list. Press again to reach the next letter.
Additional key presses will add letters to your search.

• Press any digit followed by

to reach a phone number

in the SIM phonebook.

• Press

for the last dialed number.

Incoming calls

When you receive a call, the name of the caller will be displayed
if the calling party is in Contacts and the caller’s number is
received from the network. If there is an associated picture it
will also be shown in a small or large version. See ‘Incoming
call picture’
on page 52.

You can select whether an ongoing program will remain active
when you get an incoming call or if the Phone program shall
interrupt it. For settings see “Incoming call behavior” on page
56.

To handle an incoming call

You can press

to answer the call or answer by voice

control, see ‘Voice control’ on page 52.

You can press

to reject a call and press

to silence the

ring signal.

An incoming call will bring up the following options:

1 Answer

– Answer the call.

2 Send Busy

– Reject the call. The calling party will hear a

busy tone and the call will be logged as a rejected call.

3 Mute

– Silence the ring signal. The calling party will not

notice that you have silenced the call. The call will be logged
as a missed call.

If a large picture of the caller fills the screen, you can press

or use the Jog Dial to access the menu with the options above.

Advertising