Smooth Fitness CE 7.4E - Manual (Page 15)

SMOOTH CE 7.4E ELLIPTICAL TRAINER
www.smoothfitness.co.uk
15
ASSEMBLY
STEP 5:
Connect the Hand Pulse Sensor Wire – Upper (117) and Hand Pulse Sensor Wire – Middle (9) as shown in FIG.10.
Attach the Handrail – Right (8) to Side Upright – Right (6) and secure using two M8 x 45mm Allen Head Bolts (59) as shown
in FIG.8. Then secure the Handrail – Left (7) to the Handrail – Right (8) with one M8 x 15mm Bolt (74) as shown in FIG.9.
NOTE: Make sure the wire is recessed into the Upright, do not trap or pinch the wire.
8
74
7
8
6
74
8
6
59
59
117
9
Fig 10
Fig 9
Fig 8