Samson CL7 - Manual (Page 3)

Introduction
3
Congratulations on your purchase of the Samson CL7 studio condenser. The
CL7 features a large, 1.1-inch, ultra thin diaphragm capsule which faithfully
reproduces a variety of sound sources including vocals, acoustic instruments
and overhead cymbals, to name a few. The extended frequency and fast tran-
sient response insures an accurate reproduction with linear characteristics from
bottom to top.
In these pages, you’ll find a detailed description of the features of the CL7
Studio Condenser Microphone, as well as step-by-step instructions for its setup
and use, and full specifications. You’ll also find a warranty card enclosed—
please don’t forget to fill it out and mail it in so that you can receive online tech-
nical support and so we can send you updated information about these and
other Samson products in the future.
With proper care, your CL7 will operate trouble free for many years. We recom-
mend you record your serial number in the space provided below for future ref-
erence.
Serial number:
Date of purchase:
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number, the
unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-372-
6766) for a Return Authorization number prior to shipping your unit. Please
retain the original packing materials and if possible, return the unit in the origi-
nal carton and packing materials.
CL7 Features
• Large Diaphragm Studio Condenser
• 1.1” Capsule with 3-micron Gold Sputtered Diaphragm
• Switchable Hi-pass Filter, 12dB per octave at 100 Hz
• Switchable 10 dB PAD for handling signals with high SPL’s (Sound
Pressure Levels)
• Smooth and transparent sound reproduction
• Cardioid pick-up pattern
• 36-52 Volt Phantom Power operation
• Internal Shock-mount
• Extended frequency response
• Solid Die Cast construction
• Swivel Stand Mount and Carry Case included