Sharp CP-ES770 - Manual (Page 11)

11
04/12/21 CD-ES770(U)2.fm TINSEA095AWZZ
Preparation for Use
CD-ES770
Antenna connection
Supplied FM antenna:
Connect the FM antenna wire to the FM 75 OHMS terminal and
position the FM antenna wire in the direction where the strongest
signal can be received.
Supplied AM loop antenna:
Connect the AM loop antenna to the AM LOOP jack. Position the
AM loop antenna for optimum reception. Place the AM loop antenna
on a shelf, etc., or attach it to a stand or a wall with screws (not
supplied).
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Installing the AM loop antenna:
Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
Placing the speaker system
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
Do not mistake the right and the left chan-
nels. The right speaker is the one on the right
side when you face the unit.
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured. Incorrect
The left and right speakers have individual shapes. For best perfor-
mance, place the speakers according to the diagram below.
Black
Red
CD-ES770(U) TINSEA095AWZZ 3
2
Left speaker
Note:
The speaker grilles are not removable.
Right speaker