Speciþ cations, Appendix, Power output – Sunfire 913-047-00 User Manual

Page 14: Power at clipping, minimum, Hum and noise, Maximum output current, Maximum output voltage, Input impedance, rca inputs, Input sensitivity for rated out put, Input impedance,xlr input

Advertising
background image

User's Manual

14

APPENDIX

SpeciÞ cations

© 2002 SunÞ re Corporation.
All rights reserved. SunÞ re Corpora-
tion re serves the right to improve
its products at any time. Therefore,
speciÞ cations are subject to change
without notice.

Manual part number:
913-047-00 Rev A

Power output

250 watts con tin u ous, per channel,

all channels driven into eight ohms,
from 20 Hz to 20 kHz with no more
than 0.5% T.H.D.

Power at clipping,
minimum:

500 watts per chan nel into four

ohms.

Hum and Noise

-115 dB, A-Weighted

Maximum output current

80 amperes peak to peak per

channel

Maximum output voltage

45 Vrms

Input impedance, RCA
inputs

24 k

Input sensitivity for rated
out put

Unbalanced: 1.6 Vrms

Balanced: 0.8 Vrms

Input impedance,XLR input

24 k

Ω, each leg balanced to

ground Female XLR
Pin 1 ground
Pin 2 positive (hot)
Pin 3 negative (cold)

12 VDC Trigger Inputs

Input voltage range

5 VDC-18 VDC

Input im ped ance

Approximately 600

(20 mA at 12 V)

Removable terminal block
Dual 1/8” minijacks for daisy-

chaining

Power Consumption

45 W at idle

200 W typical (1/8th power)
1800 W absolute maximum

(fuse limit)

Dimensions

17.0 inches wide

5.75 inch es high (with feet)
16.5 inches deep (to tips of
connectors)

Weight

30 lbs

Finish

Brushed aluminum and black

anodize

Advertising