Speco Technologies HTB10X - Manual

◈ FEATURE
1. Long visible range at night.(50m Max. indoors, 40m Max.
outdoors)
2. This camera uses split glass technology to prevent IR light
reflection.
3. This camera has a Varifocal IR lens to prevent focus
drift under IR lighting.
4. The IR cut filter is removed at night to receive maximum
available light.
5. This product is weather proof to resist rain, snow and
other environmental factors. (IP65)
6. This product is made of corrosion-free materials to resist
rust and corrosion for extended periods of time.
7. The built-in sunshield helps the camera produce clear
pictures under a variety of lighting conditions.
8. Power & video cables are concealed for extra security.
(Cable through the mount).
9. Unique bracket allows the camera to be fully adjustable
from both wall and ceiling mounting positions.
10. Dual voltage operation. You can connect 24V AC or 12V DC
regardless of polarity. The Line-Lock function is available
when you use 24V AC power.
11. The IR output level is adjustable to suit any lighting condition.
12. High magnification zoom / Auto focus
- Max. 100X zoom is available.(Optical:10X, Digital:10X)
- It features “Auto focus" for maximum versatility.
13. DNR (Digital Noise Reduction)
By using this DSP chip and associated technology, the
amount of low light noise has been significantly reduced,
and the signal-to-noise ratio(S/N) as well as horizontal
resolution has been improved, resulting in a clear and
sharp image display even in the dark.
14. Privacy zoom masking (max. 32 zones/8 programmable
zone per screen)
The privacy zone function makes it possible to mask
specific areas of the scene from view.
15. Motion Detection (4 programmable zone per screen)
You can transmit an alert signal when it detects motion
of an object on the screen. This feature is useful when
you have to monitor several screens simultaneously.
16. High resolution Horizontal Resolution of 560TV Lines:
Clear image quality has been achieved by employing a
1/4" SONY Super HAD CCD with 410,000 pixels, which
provides a horizontal resolution of 560 TV lines.
17. OSD (On Screen Display)
For easy adjustment of all features.
18. RS-485 control
RS-485 communication is available to control the camera
OSD and lens
19. Day & Night function
The camera can distinguish between day and night and
will make changes according to the conditions. It maintains
the most suitable color in daytime and B/W at night
.
◈ CONFIGURATION
<Caution>
RS485 signal only-Do not apply power to this cable.
To avoid product failure, connect ORANGE wire to RS485A
and WHITE to RS485B, Never do it backwards.
◈ WALL MOUNT INSTALLATION #1
1. Make a hole Ø30mm in diameter for routing cable.
2. Using the mounting plate, drill four holes on the wall.
3. Insert the anchors.
4. Attach the screws.
◈ WALL MOUNT INSTALLATION #2
1. Adjust horizontal angle.
1) Loosen the bolt to adjust the horizontal angle of the
camera.
2) Use the WRENCH to tighten the bolt after adjusting
the camera.
2. Adjust vertical angle
1) Loosen a bolt to adjust vertical angle of the camera.
2) Use the WRENCH to tighten a bolt after adjusting the
camera.
◈ CEILING MOUNT INSTALLATION #1
1. Make a hole Ø30mm in diameter for routing cable.
2. Using the mounting plate, drill four holes on the ceiling.
3. Insert the anchors.
4. Attach the screws.
◈ CEILING MOUNT INSTALLATION #2
1. Adjust horizontal angle.
1) Loosen the bolt to adjust the horizontal angle of the
camera.
2) Use the WRENCH to tighten the bolt after adjusting the
camera.
2. Adjust vertical angle
1) Loosen the bolt to adjust the vertical angle of the
camera.
2) Use the WRENCH to tighten a bolt after adjusting the
camera.
HTB10X