Sanyo PLC HF15000L - Manual (Page 47)

47
If the projector cannot reproduce proper video image,
select a specific broadcast signal format from among PAL,
SECAM, NTSC, NTSC 4.4, PAL-M, and PAL-N.
The projector automatically detects an incoming video signal,
and adjusts itself to optimize its performance.
When the Video System is 105i, 1080i or 1080p, select the
system manually.
If the projector cannot reproduce proper video image, select
a specific component video signal format from among 480i,
575i, 480p, 575p, 70p, 105i, 1080i, and 1080p.
Video jack or S-video jack
The projector automatically detects an incoming video
system, and adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the
system manually.
Video Input
1
AV System menu (Video or S-video)
AV System menu (y, Pb/Cb, Pr/Cr)

Press the MENU button to display the On-Screen Menu.
Use the Point ed buttons to select Input and then
press the Point 8 or the SELECT button.
Use the Point ed buttons to select System and then
press the Point 8 or the SELECT button.
 Use the Point ed buttons to select the desired system
and then press the SELECT button.
✔
Note:
The AV System Menu cannot be selected when selecting RGB
(Scart).
Video System Selection
y, Pb/Cb, Pr/Cr jacks
Auto
PAL/SECAM/NTSC/NTSC4.4/PAL-M/PAL-N
Auto
y, Pb/Cb, Pr/Cr SIGNAL FORMAT