Sony DRX-S70U-W - Manual (Page 9)

9
Se
tu
p
Connection through USB
Note
This product including bundled software functions properly under Windows Vista, and
Windows XP.
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with a USB connector, install a USB
interface card.
• Have the manual for your computer handy.
These instructions apply to most commonly used computers.
1
Start your computer.
2
Connect the necessary cables.
• Connect the USB cable to the drive’s USB connector.
• Connect the supplied AC power cord to the supplied AC power adapter. Then
connect the AC power adapter to the drive’s DC IN jack, and connect the
power cord to the power outlet.
Notes
• This drive does not have a power switch. The drive turns on when connected to a power
supply with the AC power adapter.
• Using the wrong type of cable with this product can cause it to malfunction.
Follow the instructions when connecting the product.
Before Connection
Installation
USB Cable
AC power adapter AC power cord